Protecting Still Pictures - Panasonic HDC-SX5P Operating Instructions Manual

2
Move the cursor button up or
down to select [ALL SCENES] or
[SELECT] and press the cursor
button.
≥ When [ALL SCENES] is selected, all files on
the SD card except the protected files will be
erased. Proceed to step 5.
3
(Only when [SELECT] is selected in step 2)
Select the file to be deleted, then
press the cursor button.
The selected file is encircled by a red frame.
≥ When the cursor button is pressed again, the
file will be unselected.
≥ Up to 99 files can be selected in succession.
4
(Only when [SELECT] is selected in step 2)
Press the button.
5
When the confirmation message
appears, select [YES], then press
the cursor button.
(Only when [SELECT] is selected in step 2)
To continue deleting other files
Repeat steps 3-5.
To complete editing
Press the MENU button.
ª Deleting still picture files recorded
on an SD card by other products
A still picture file (other than JPEG) that cannot
be played back on this unit may be erased.
≥ Protected files cannot be deleted.
≥ Do not open the card slot cover while deleting.
The deletion will stop.
≥ In case of [ALL SCENES], the deletion may take
time if there are many files on the SD card.
≥ Do not turn off this unit while deleting.
≥ When you delete files, use a battery with
sufficient battery power or use the AC adaptor.
≥ If files conforming to DCF standard are deleted,
all the data related to the files will be deleted.

Protecting still pictures

This is for preventing still picture files
from being deleted by mistake.
Files recorded on an SD card can be protected so that they
are not deleted by mistake. (Even if you protect some files on
an SD card, formatting the SD card will delete them.)
¬ Rotate the mode dial to select
and then select the [
1
Press the MENU button, then
select [PLAY SETUP]
[SCENE PROTECT]
press the cursor button.
2
Select the file to be protected and
then press the cursor button.
The [ ] indication appears and the file is
protected.
≥ Press the cursor button again to cancel the
setting.
≥ 2 or more files can be set in succession.
To complete the settings
Press the MENU button.
Editing
PHOTO
] tab.
#
#
[YES] and
MENU
91
VQT1J42