Answering Video Calls; Remote Monitoring - SoftBank 940P User Manual

Answering Video Calls

2
When a Video Call Arrives...
Handset rings; Notification Light flashes.
If Caller ID is sent, number appears in Display;
if saved in Phone Book, caller's name appears.
When an International call arrives,
appears at upper left of caller's phone number.
1
Inside Camera Image is sent.
To send Alternative Image:
[Subst.]
2 to end call
Note
Other party's voice sounds via Earpiece in Manner Mode; activate
Speaker ( P.2-12).
2-8
Tip
Adjust Ringer Volume Incoming Call Functions (
● ●
Operations Available during a Video Call (
●

Remote Monitoring

Use 940P as a monitoring camera to observe a remote place
from a phone with 3G-324M compliant Video Call functions.
Remote Monitoring starts when 940P receives a Video Call
from preset phone number.
Saving Numbers to Activate Remote Monitoring
Main Menu Settings Video Call
Enter Phone Password
1
<Not Recorded>
2
Ring Tone Duration
3
Setting ON
4
Setting cannot be set to ON in Manner Mode.
P.2-5)
P.2-12)
Remote Monitoring
Other ID
Enter a phone number
Enter time (sec)