Charging Battery - SoftBank 940P User Manual

1

Charging Battery

Use only specified AC Charger (sold separately).
Charging Time: Approximately 130 minutes
Charger
Blades
AC Outlet
2
3
AC Charger
Charger Connector
1-14
Charging Indicator
Arrows up
Release Tabs
1
Port Cover
Connect AC Charger to handset
1
Insert Charger Connector (printed side up) into External Port.
Plug AC Charger into AC Outlet
2
Extend Charger Blades.
Charging Indicator illuminates and charging starts.
When charging is complete, Charging Indicator goes out.
When Charging Indicator flashes, remove AC Charger and battery
from handset then attach them again.
Charge Sound is heard when charging starts/ends.
When handset is turned off or in Manner Mode, nothing sounds.
When charging is complete, unplug AC Charger,
3
External Port then disconnect handset
Squeeze Release Tabs to remove Charger Connector, and replace Port
Cover.
Note
For details, read AC Charger instructions.
Alternatively, charge battery by using Desktop Holder (not included).
Tip
Charging Start/End Tone Off (
●
P.18-3)