Handset Power On/Off - SoftBank 940P User Manual

Handset Power On/Off

1 Press and hold
Start-up window appears and handset
enters Standby.
Enter PIN if PIN Authentication is ON
( P.12-2).
Press for 2+ seconds
2
Handset shuts down.
Do not turn on handset immediately
after turning off. Wait a few seconds.
Initial Setup
■
The first time handset powers up and Initial setting window appears, select
YES and set the following: (Each item can be set separately.)
Date & Time* ( P.18-8) Set date and time
Phone Password Enter 9999, and enter new Phone
( P.12-2) Password (4-8 digits)
Select ON or OFF
Key Tone ( P.18-3)
Speed Selector Sound
Select a pattern or OFF
( P.18-6)
Font Size ( P.18-6) Set Display font size all at once
Keyguard ( P.12-4) Select ON or OFF
* May be automatically set
View Information Messages
■
At time of purchase, information message is provided for your convenience.
to highlight an Event Indicator (
Incoming Mail
Widget appears in Standby after information message is viewed.
Note
If USIM not inserted After power-off Insert USIM appears, clean
and properly re-insert USIM Card then restart handset.
After a period of inactivity, Display turns off.
Retrieving Network Information
When ,
handset initiates Network Information retrieval;
Standby
retrieve it.
Update Network Information to use messaging, Internet, etc.
Update Network Information manually:
Connectivity
P.1-22), then press
Received Select a message
or is pressed for the first time in Standby,
Main Menu
Retrieve NW Info YES
1
to
Settings
1-15