Call Settings; Call Time & Call Cost; Making & Receiving Calls - SoftBank 940P User Manual

Call Settings

Settings
Call Time & Call Cost
From Main Menu Settings
Setting/Operation
Display Call Time/Cost 1
■
Call Time/Cost
＞
Reset Total Call Charge/Time
■
Reset Enter Phone Password
＞
Reset Total Duration or Reset Total Cost
For Reset Total Cost , enter PIN2)
(
Set Charge Limit 2
■
Set Max Cost Limit ON
＞
Enter PIN2
1
May not be available depending on subscription status. In that case, Set
Max Cost Limit is not available.
2 When set to ON , incoming/outgoing calls including emergency number
calls are not dialable if charge limit is reached.
Making & Receiving Calls
Main Menu Settings
From
Setting/Operation
Change Earpiece Volume
■

Call Settings

Volume
＞
Call Settings
Default
–
–
YES
OFF
Enter charge limit
Default
Level 4
to adjust volume
Set Handset Response when Closed during Call
■
Call Settings Setting When Closed
＞
Hold Call * or End the Call
Set Hold Tone
■
Call Settings Hold Tones
＞
Holding Tone Select a tone
Turn Off Noise Reduction
■
Call Settings Noise Reduction
＞
Change Alarm before Connection is
■
Disconnected
Call Settings Quality Alarm
＞
Change Alarm until Line is Reconnected
■
Call Settings Reconnect Signal
＞
Low Tone
Call Service Numbers
■
(Service not available at present)
Call Settings Service Numbers
＞
Select a service number
Specify Phone Book Entry to Call with Earphone
■
Phone Settings Headset Switch to Call
＞
Voice Call Search Phone Book
* When Hold Call is selected: Speaker ON (Hold tone sounds from
speaker)/ Speaker OFF (Hold tone does not sound from speaker)
Continue
On-hold Tone:
On-hold Tone 1
On-hold Tone or
Holding Tone:
JESU JOY OF
MAN's
ON
OFF
High Tone
OFF or Low Tone
High Tone
OFF or
–
OFF
Select an entry
18
18-9