Table of Contents
Advertisement
7.
ATX power connectors (24-pin EATXPWR; 8-pin EATX12V_1; 4-pin EZTX12V_2)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
DO NOT forget to connect BOTH of the 4-pin and 8-pin EATX12 V power plug.
•
•
•
1-26
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
If you want to use two or more high-end PCI Express x16 cards, use a PSU with
1000W power or above to ensure the system stability.
Chapter 1: Product Introduction
Hide quick links:
Advertisement
Table of Contents
