Setup Mode - Asus X99-A II User Manual

DirectKey (DRCT)
[Disabled]
[Enabled]

Setup Mode

[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
CSM (Compatibility Support Module)
This item allows you to configure the CSM (Compatibility Support Module) items to fully
support the various VGA, bootable devices and add-on devices for better compatibility.
Launch CSM [Enabled]
[Auto]
[Enabled]
[Disabled]
The following items appear only when you set the Launch CSM to [Enabled].
3-30
Disables the DirectKey button. The system will only power on or off when
you press the DirectKey button.
Allows the system to power on and go to the BIOS Setup directly when you
press the Reset button. Connect the 2-pin connector of the chassis reset
buton cable to the onboard DRCT header.
This item allows you to go to EZ Mode of the BIOS after POST.
The system automatically detects the bootable devices and the add-
on devices.
For better compatibility, enable the CSM to fully support the non-UEFI
driver add-on devices or the Windows
Disables the CSM to fully support the non-UEFI driver add-on devices
or the Windows UEFI mode.
®
Boot Device Control [UEFI and Legacy OPROM]
This item allows you to select the type of devices that you want to boot.
Configuration options: [UEFI and Legacy OpROM] [Legacy OpROM only]
[UEFI only]
Boot from Network Devices [Legacy only]
This item allows you to select the type of network devices that you want to
launch.
Configuration options: [Legacy only] [UEFI driver first] [Ignore]
Boot from Storage Devices [Legacy only]
This item allows you to select the type of storage devices that you want to
launch.
Configuration options: [Legacy only] [UEFI driver first] [Ignore]
Boot from PCIE/PCI Expansion Devices [Legacy only]
This item allows you to select the type of PCIe/PCI expansion devices that
you want to launch.
Configuration options: [Legacy only] [UEFI driver first]
UEFI mode.
®
Chapter 3: BIOS Setup