Mounting The Camera - Panasonic AW-RC400N Operating Instructions Manual

Installation
(Be sure to ask your dealer to install the unit.)

$ Mounting the camera

When mounting the camera on the pan/tilt head, be very careful to ensure that the camera does not fall off or fall down.
1 Mount the lens onto the convertible camera. (Before mounting a large lens, consult with your dealer.)
2 Insert the rubber piece between the camera and pan/tilt head, and mount the convertible camera after aligning it with the
guide pins. Use a tool to tighten up the mounting screws so that they are securely tightened.
For a stand-alone installation
Set the guide pin.
Mount the camera with the
mounting screws.
Rubber piece
Mounting screws
For installation on the ceiling
Be absolutely sure to use a screwdriver or other tool to tighten the two camera mounting screws
so that the camera is secured firmly.
After the camera has been mounted, check that there is no play in the way it was mounted.
17
Indoor Pan/Tilt Head AW-PH400
Set the guide pin.
Mount the camera with
the mounting screws.
Rubber piece
Mounting screws