Mounting On And Removing From The Digital Camera - Panasonic LUMIX DMW-BGS1 Operating Instructions Manual

Mounting on and removing from the
digital camera
• Turn off the digital camera and confirm that the digital camera is not
charging. (Mounting the unit onto, or removing it from, the camera while the
power is on may cause trouble and is not recommended.)
1 1 Remove the cover for the
battery grip connector on
the digital camera.
2 Remove the terminal cap on
the Battery Grip.
Store the cover for the
3
battery grip connector in the
terminal cap.
• Store in the same orientation as the
mark (A).
Store the terminal cap in the
4
storage compartment of the
Battery Grip.
• Return the cover for the battery grip
connector and the terminal cap to their
original position after use to protect
the terminals.
2 Insert by aligning the
attachment screw, electrical
contacts, and camera
attachment pins.
3 Turn the attachment screw in
direction of the arrow to
attach securely.
Note
• Keep the terminal cap out of reach of children to prevent swallowing.

(ENG) DVQX1647
7