Changing Engine Oil - Kubota Z482-E3 Operator's Manual

Models
124 mm (4.88 in.)
D1503-M-E3
D1703-M-E3
7.0 L
D1803-M-E3
(1.85 U.S.gals.)
D1803-M-DI-E3
V2003-M-E3
V2203-M-E3
9.5 L
V2403-M-E3
(2.51 U.S.gals.)
V2403-M-T-E3
V2403-M-DI-E3
*90 mm (3.54 in.) oil pan depth is optional.
Oil quantities shown are for standard oil pans.
Models
V3600-E3, V3600-T-E3,
V3300-E3BG,
V3600-T-E3BG
*API service classification: above CF grade
A Engine oil should be MIL-L-2104C or have
properties of API classification CF or higher.
Change the type of engine oil according to the
ambient temperature.
above 25°C (77°F)
-10°C to 25°C (14°F to 77°F)
below -10°C (14°F)
A When using oil of different brands from the previous
one, be sure to drain all the previous oil before
adding the new engine oil.
A Be sure to inspect the engine, locating it on a level
place. If placed on gradients accurately, oil quantity
may not be measured.
Oil pan depth
*90 mm (3.54 in.)
5.6 L
(1.48 U.S.gals.)
–
7.6 L
(2.01 U.S.gals.)
–
Quantity
13.2 L (3.49 U.S. gal.)
SAE30 or SAE10W-30
SAE15W-40
SAE10W-30 or SAE15W-40
SAE10W-30
PERIODIC SERVICE
BChanging engine oil
CAUTION
To avoid personal injury:
A Be sure to stop the engine before
draining engine oil.
A When draining engine oil, place
some container underneath the
engine and dispose it according to
local regulations.
A Do not drain oil after running the
engine. Allow engine to cool down
sufficiently.
1. Change engine oil. (Refer to page 13)
2. Remove the drain plug at the bottom of the engine,
and drain all the old oil. Drain oil will drain easier
when the oil is warm.
(1) Oil drain plug
3. Add new engine oil up to the upper limit of the oil
level gauge.
25