Configuration Of The Trekstor Moviestation - TrekStor MovieStation Antarius User Manual

d) Connect your MovieStation to a television via the composite video connection.
e) Connect the USB data storage device to your MovieStation.
f ) Press the "SETUP" button or select "S
Under the "S
YSTEM
g) To start the firmware update, select "U
h) It takes some time for the MovieStation to update the firmware. Please wait until the
firmware update has been completed and do not turn your MovieStation off during
this process. As soon as the firmware update has been completed, the MovieStation
automatically restarts.
i) Your MovieStation is now ready to be used again and can once again be connected to
your television via HDMI alone if you wish.

9) Configuration of the TrekStor MovieStation

To open the configuration mode of the MovieStation, select the "S
main menu or press the "SETUP" button if you are in another mode.
You can switch between the different menus found at the top of the screen by pressing the
or button. The available menus include the "P
d J
"S " menus.
YSTEM
You can switch between the menu items available for the selected menu by pressing the
or button. Press the
K
press the button. To exit the settings menu and return to the last active mode, press the
M
"SETUP" button.
To select one of the available options for a setting, press the
option is marked.
Pictures
Slide show interval: Under the menu item "S
•
duration of a picture during a slide show.
Transition effect: Here you can select from a number of cross-fade effects when
•
switching between pictures.
Background music: If music files are also saved in a folder with pictures, you can select
•
whether this will be played as background music during a slide show under this menu
item.
audio
Night mode: This menu item is used to limit the volume of the MovieStation. Select "O
•
if you want to lower the volume overall, and "C
during loud sections.
Digital audio output: Under the "D
•
you want the digital sound output to be via the HDMI port ("HDMI") or via the optical
audio output ("SPIDF") and whether this should be in 2-channel sound ("LPCM") or as a
digital bitstream in RAW format ("rAw").
video
Aspect ratio: Under this menu item, you can adjust the aspect ratio of the picture to the
•
aspect ratio of your television. You can select between the following presentation modes:
"P & S 4:3", "L
AN CAN
Brightness: This menu item is used to set the brightness.
•
Contrast: This menu item is used to set the contrast.
•
TV system: Under the menu item "TV
•
the MovieStation. If you select "A
automatically determine the appropriate video output signal.
ETTINGS
" menu, select the menu item "S
button to select the marked menu item. To exit the submenu,
z
IGITAL AUDIO OUTPUT
4:3", "16:9".
ETTErBOx
" at this point, the MovieStation will attempt to
UTO
" in the main menu to go to the settings menu.
I " and press the
YSTEM NFO
" and press the
z
PDATE
", "A
ICTUrE UDIO
z
LIDE SHOw INTErVAL
" if you want to limit the volume only
OMFOrT
" menu item, you can set whether
", you can set the video output signal of
SYSTEM
button.
z
button.
" menu item in the
ETTINGS
", "V ", "N " and
IDEO ETwOrk
button when the respective
", you can set the display
L
"
N
En
43