Controls And Connections; Controls For The Trekstor Moviestation; Connections On The Side Of The Trekstor Moviestation; Connections On The Back Side Of The Trekstor Moviestation - TrekStor MovieStation Antarius User Manual

1) Controls and Connections

1.1) Controls for the TrekStor MovieStation

A) button: Switches the device on or off.
/
Blue illumination: The MovieStation is ready to be used. It takes about 15 seconds
i
during startup/shutdown to load/save the system setting. During this time, the button is
illuminated blue.
Red illumination: The MovieStation is in standby mode.
B) Infrared receiver

1.2) Connections on the side of the TrekStor MovieStation

A) USB host port: Used to connect USB data storage devices (e.g. USB stick, USB hard disk).
B) Card slot (SD, SDHC, MMC, MS)

1.3) Connections on the back side of the TrekStor MovieStation

www.trekstor.de
5 V 3 A
Made in China
A B
A) "DC IN" port: Connection for power supply
B) HDMI output
C) Video output (composite cinch)
D) Analog audio output (stereo cinch)
E) Digital optical audio output (S/PDIF)
F) Ethernet port (RJ45): Used for connecting to your network ("LAN").
G) USB host port: Used to connect USB data storage devices (e.g. USB stick, USB hard disk).
H) Port for the included WLAN antenna
This device may only be used with the WLAN antenna that it is delivered with.
a
En
28
Video out
HDMI out Composite L
C
USB Host
A
Audio out
R Optical out LAN
D E F
A
B
MS SD MMC
B
USB Host WLAN
G H