Sewing Operation Screen - Brother BAS H series Instruction Manual

1-1-3. Sewing operation screen

・
When the power is turned on while the LCD panel is connected to the sewing machine, this screen is displayed
automatically.
・ If any other screen is being displayed, touch the sewing key in the home screen to display this screen.
(27)
(7)
(8)
(29)
(26)
(1) Production counter key
(2) Lower thread counter key
(3) Lower thread setting key
(4) Screen lock key
(5) Cycle program key
(6) Copy key
(7) Type key
(8) Program No. keys
(9) Step No. keys
(10) Split No. keys
(11) Speed keys
(12) Section No. keys
(13) Tension keys
(14) Wiper key
(15) Thread key
(16) Clamp key
(17) Scale Offset key
(18) Slow Start key
(19) Wind key
(20) Direct selection keys
(21) Tension operation check key
(22) Test key
(23) Current stitch number
/ Total number of stitches
(24) Sewing area size
(25) Sewing data information
(26) Preview
(27) Model name
(28) Date and time
(29) Comments
(2)
(1) (3)
This shows the production counter value.
If you keep pressing this key, the display switches to the setting menu screen.
This shows the lower thread counter value.
If you keep pressing this key, the display switches to the setting menu screen.
Displays the lower thread setting value. If you keep pressing this key, the display
switches to the setting menu screen.
Touch this key to switch the home screen between locked and unlocked.
Touch to switch to the cycle program editing screen.
Touch to switch to the sewing program copying screen.
Touch to select the program type.
Touch to display/select the current program number.
Touch to display/select the current step number.
Touch to display/select the current split number.
Touch to display/select the sewing speed.
Touch to display/select the section number for the digital tension.
Touch to display/select the digital tension value.
Touch to switch the thread wiper on/off.
Touch to switch to the threading screen.
Touch to switch to the Adjust Clamp Height setting screen.
Touch to switch to the Scale/Offset setting screen.
Touch to switch to the Slow Start setting screen.
Touch to switch to the thread winding screen.
You can register normal/cycle program numbers into each of these keys.
When you touch a key, the program assigned to that key is selected.
Touch to switch to the tension operation check screen.
This is not displayed when digital tension is not being used.
Touch to switch to test mode.
Shows the current stitch number and the total number of stitches.
Shows the size of the sewing data area.
Shows information about the sewing data.
Shows a preview of the sewing data.
Shows the model name and specifications.
Shows the current date and time.
Shows comments about the sewing data.
BAS H series
1. USING THE LCD PANEL (BASIC OPERATIONS)
(9) (10) (4)
(11)
(12)
(23)
(14)
(17)
(24)
(25)
(21)
(28)
(6)
(5)
(13)
(16)
(15)
(18)
(19)
(20)
(22)
2