Brother BAS H series Instruction Manual page 8

1. USING THE LCD PANEL (BASIC OPERATIONS)
Slow start pattern
Set memory switch No. 100 to "ON" and then touch the Slow Start key (5) to display the slow start setting screen.
(13)
・Touch the △ or ▽ key (11) to adjust the starting-up speed at the sewing start.
・Touch the OK key (12) to confirm, or touch the Cancel key (13) to return to the [sewing operation screen]
without changing the setting.
・Touch the Reset key (14) to return the setting to the initial value.
* The smaller the number, the slower the start.
* This is used to stop the thread from pulling out at the sewing start, and at times when skipped stitches might
easily occur.
Lo
Sewing speed
for 1st stitch
Sewing speed
for 2nd stitch
Sewing speed
for 3rd stitch
Sewing speed
for 4th stitch
*1 Sewing will be carried out at the sewing speed which is set by the parameters.
* For details on the sewing data reading method, refer to "3. USING STORAGE MEDIA".
* When memory switch No. 400 is set to ON, the X-scale, Y-scale, sewing speed and work clamp height can be recorded
separately for each program number.
* When memory switch No. 100 and No. 400 are set to ON, slow start patterns can be recorded separately for each program
number.
* For details on memory switches, refer to "2-1. Memory switch setting method".
5
1 2 3
200 200 300
200 300 400
300 400 500
500 600 700
BAS H series
(11)
(14)
4 5 6
400 400 400
400 500 600
600 800 1000
900 1200 1400
(12)
7 8 9
400 600 800
800 1000 1200
1200 1600 *1
*1 *1 *1