Brother BAS H series Instruction Manual page 16

1. USING THE LCD PANEL (BASIC OPERATIONS)
NOTE:
When setting the work clamp height and the
intermediate work clamp height, check that slider (1) is
touching the work clamp lifter plate assembly (2).
3091B
Intermittent presser foot operation
Doing standby
When lowered
While sewing
5033Q
13
1 Intermittent presser foot lift amount
2 Intermittent presser foot height
The settings can be made by the above
operations.
However, set the intermittent presser foot
height to a higher setting than the intermittent
presser foot stroke.
* If it is set smaller, the intermittent presser foot
will come into contact with the needle plate.
3 Intermittent presser foot stroke
Refer to "Adjusting the intermittent presser
foot" in the Instruction Manual for the model
you are using.
BAS H series