Audio Section - Teac CRX260i User Manual

CD Programming
Up to 20 tracks can be programmed to play in any sequence. Before use, be sure to
press the STOP button.
1. Set in CD mode.
2. Press the "PROG/ADJ" button, "MEMORY" will flash on the LCD display.
It will indicate program number and digits of the track number to be programmed.
3. Select a desired track by pressing the
4. Press the "PROG/ADJ" button to store the track into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if desired.
6. When all the desired tracks have been programmed, press the PLAY/PAUSE
button to play the disc in the order you have programmed.
7. Press the "STOP" button twice to terminate programmed play. The "PROGRAM"
icon will disappear on the screen.
Avoid spilling any water or other liquids
or buttons.
13
GENERAL
Power supply
Standby power consumption
Power consumption
Dimensions of unit
Frequency range

AUDIO SECTION

Output Power (RMS)
Speaker
Supported Disc type
Weight
-
: AC 240V ~ 50Hz
: 2.6 Watts
: 16 Watts
: 250(W) X 179(H) X 103(L)mm
: AM 515 - 1650 KHz
: FM 87.5 - 108.5 MHz
: 2 x 1.5W R.M.S
: 8 Ohms
: MP3, CD, CD-R, CD-RW
: 7 Kgs
4