Setting The Clock; Sleep Function - Teac CRX260i User Manual

. S
p .
S
S
Press to reduce volume.
T
i o
and
P D
automatically after 90, 60, 30 or 15 minutes.
P
activating,
To
In Tuner mode, press to switch between AM or FM.
T
This unit provides 4 sound modes to enhance your listening quality. You can select
the desired effect by pressing the"EQ" button repeatedly for the following sequence
FLAT CLASSIC ROCK
REMARKS: Insert 2 "AAA" batteries (not included) before using.
7
1 ep All
CD/RADIO/iPod to turn off
function during
i .
POP JAZZ

Setting the Clock

- can only be set during standby mode
1. Press"PROG/CLOCK ADJ" button. Either "12H" or "24H" will display.
2. Choose 12/24 HRS by pressing button, then press "PROG/CLOCK ADJ" button.
3. Press button for HOUR setting, then press "PROG/CLOCK ADJ" button to store.
4. Press button for MINUTES setting and press "PROG/CLOCK ADJ" button to store.
Setting the Alarm 1 (wake to CD, iPod, Tuner)
1. Press the "ALARM 1" button, the ALARM 1 icon will be
shown on the display.
2. Press the "FUNCTION" button to select your desired source
CD, iPOD or TUNER, then press VOL- or VOL+ to adjust the
volume level.
3. Press the or button to set the hours.
Press "ALARM 1" button to store.
4. Then, Press the or buttons to set the minutes.
Press "ALARM 1" button to store.
5. Switch the system to Standby mode. At the preset time the selected source will play,
press ALARM 1 button to cancel, The ALARM 1 icon is still be shown on the display for
function the next day.
6. To completely turn off ALARM 1 function, press ALARM 1 button once again, the
"ALARM 1" icon will not be shown again.
NOTE: If the selected source CD is not available when the preset time is
reached, BUZZER will be selected automatically.
Setting the Alarm 2 (Buzzer)
1. Press the "ALARM 2" button, the ALARM 2 icon will be shown on the display.
2. Press the or buttons to set the hours. Press "ALARM 2" button to store.
3. Then, Press the or buttons to set the minutes. Press "ALARM 2" button to store.
4. Switch the system to Standby mode. At the preset time the BUZZER source will play,
press ALARM 2 button to cancel, The ALARM 2 icon is still be shown on the display for
function the next day.
5. To completely turn off ALARM 2 function, press ALARM 2 button once again, the
"ALARM 2" icon will not be shown again.

Sleep Function

The sleep function can only be set while the unit is on in either RADIO, CD or iPod
mode. To activate, press the "SLEEP" button on the remote handset. Continue
pressing the "SLEEP" button, one press at a time, to set the timer to either 90,
60, 30, 15 minutes or OFF.
8