Toshiba TECRA M9 Maintenance Manual page 219

3.30 SETUP
Whether or not you need to configure the computer with these options depends
primarily on the kind of software or peripherals you use.
(a) Core-Multi Processing
NOTE: This is not displayed in PCs with a single core CPU.
The Core Multi-Processing sets the CPU operating mode.
Enabled
Disabled
(b) Dynamic CPU Frequency Mode
Use this option to choose a setting from the followings.
Dynamically Switchable
Always High
Always Low
(c) Execute-Disable Bit Capability
Selects the function to reports whether the CPU Execute-Disable Bit is
available or not to OS. When the CMOS is damaged, the default is Available.
When Home is pressed, the setting is not changed and the setting is kept.
Available
Not Available
(d) Virtualization Technology
Virtualization Technology sets enable or disable of the Intel Virtualization
Technology installed in the CPU.
Intel Virtualization Technology is the technique that allows one machine to
operate as multiple virtual machines.
Enabled
Disabled
Virtualization Technology
(e) Auto Power On
TECRA M9 Maintenance Manual (960-631)
Enables Core Multi-Processing functions. (Default)
Disables Core Multi - Processing functions.
Enables Intel SpeedStep technology. When the computer is
in use, the CPU power consumption and clock speed are
automatically switched when necessary. (Default)
Disables Intel SpeedStep technology and always runs the
processor at its fastest speed.
Disables Intel SpeedStep technology and always runs the
processor at low power consumption and low speed.
Reports that the function is available. (Default)
Reports that the function is not available.
Enables Virtualization Technology.
Disables Virtualization Technology. (Default)
3 Tests and Diagnostics
[CONFIDENTIAL] 3-95