Placing Originals Into The Adf; Placing Standard Size Originals - Epson DS-1630 User Manual

User's Guide
❏ Carbon-less papers
❏ Thermal papers

Placing Originals into the ADF

Placing Standard Size Originals

Note:
Remove any documents from the scanner glass. Make sure there is no dust or dirt on the glass and the clear part shown
below before scanning.
1. Slide the edge guides on the ADF input tray all the way out. When scanning A4 size paper, raise the stopper.
2. Fan the originals.
Hold both ends of the originals and fan them a few times, and then tap the top edges of the paper on a flat
surface to align the sheets.
Specifications of Originals and Placing Originals
17