Table of Contents
Advertisement
User's Guide
Specifications of Originals and Placing
Originals
Specifications of Originals
This section explains the specifications and conditions of originals that can be loaded in the ADF.
General Specifications for Originals being Scanned
Type of Original
Plain paper
Fine paper
Recycled paper
Post card
Business card
Envelopes
Plastic cards complying with ISO7810
ID-1 type (with or without emboss)
Laminated cards
Thermal paper
Note:
❏ All originals must be flat at the leading edge.
❏ Make sure that curls on the leading edge of the originals are kept within the following range.
A
must be 3 mm or less.
The
B
The
must be 1 mm or less while the
B
can be more than 1 mm.
Specifications of Standard Size Originals
The list of the standard size originals you can load on the scanner.
Specifications of Originals and Placing Originals
Thickness
27 to 413 g/m2
A8 size or less: 127 to 413 g/m2
Plastic cards: 1.24 mm (0.05 in.) or less
(including emboss)
Laminated Cards: 0.8 mm (0.03 in.) or
less
B
is equal to or less than
18
Size
Maximum: 215.9×6,096.0 mm
(8.5×240.0 in.)
Minimum: 50.8×50.8 mm (2.0×2.0 in.)
The loadable size varies depending on
the type of originals.
C
C
. When
is equal to or more than 10 times the
B
,
Advertisement
Table of Contents
