Panasonic AG-DVC 200E Operating Instructions Manual page 18

Viewfinder displays
Display item
1 Extender display
2 INTERVAL REC
status display
3 Time code display
4 Centre marker
5 1st line message
display (changes in
switch settings)
(AWB, ABB operation
displays)
5 2nd line message
display
(error result message
displayed after AWB
or ABB has been
performed)
6 IRIS MODE switch
status display
7 QUICK FOCUS
display
What is displayed
EX
iREC
TCG 12:59:59:24
TCR 12:59:59:24
UBG AB:CD:EF:00
UBR AB:CD:EF:00
CNT 01:59:59
+
AWB Ach ¢.¢K
AWB Ach ¢.¢K UNDER
AWB Ach ¢.¢K OVER
AWB Bch ¢.¢K
AWB Bch ¢.¢K UNDER
AWB Bch ¢.¢K OVER
AWB PRE ¢.¢K
AUTO KNEE ON
AUTO KNEE OFF
GAIN ¢¢dB
FILTER ¢
SHUTTER OFF
SHUTTER 1/¢¢¢¢
IRIS MODE ¢¢¢¢
FULL AUTO ON
FULL AUTO OFF
SCENE FILE USER
SCENE FILE 1
SCENE FILE 2
SCENE FILE 3
SCENE FILE 4
SCENE FILE STD
AWB ACTIVE
AWB OK ¢.¢K
AWB OK ¢.¢K UNDER
AWB OK ¢.¢K OVER
AWB NG
AWB PRE
ATW MODE
ABB ACTIVE
ABB OK
ABB NG
colour temp LOW
colour temp HIGH
LEVEL OVER
LOW LIGHT
UNSTABLE CONDITION
TIME OVER
SPOT
BACK
QUICK FOCUS
Status causing the display to appear
Displayed when the lens extender is being used.
Indicates the interval recording mode.
"INTERVAL REC function" (page 28).
Indicates the TCG (time code generator) value.
Indicates the TCR (time code reader) value.
Indicates the UBG (user's bit generator) value.
Indicates the UBR (user's bit reader) value.
Indicates the COUNTER (counter) value.
Displayed when ON is selected as the CENTRE MARK setting (see page
35). It indicates the centre of the viewfinder screen.
Displayed when the AWB has been attained for channel A.
Displayed when the AWB has been attained for channel A, and the colour
temperature is lower than the display range.
Displayed when the AWB has been attained for channel A, and the colour
temperature is higher than the display range.
Displayed when the AWB has been attained for channel B.
Displayed when the AWB has been attained for channel B, and the colour
temperature is lower than the display range.
Displayed when the AWB has been attained for channel B, and the colour
temperature is higher than the display range.
Displayed when AWB has been switched to PRE.
Displayed when AUTO KNEE has been changed from OFF to ON.
Displayed when AUTO KNEE has been changed from ON to OFF.
Displayed when the gain has been switched.
Displayed when the filter has been switched.
Displayed when the shutter has been set to OFF.
Displayed when the shutter has been set to ON.
Displayed when the IRIS MODE switch setting has been changed.
Displayed when FULL AUTO has been changed from OFF to ON.
Displayed when FULL AUTO has been changed from ON to OFF.
Displayed when the scene file dial setting has been switched.
Displayed while the AWB operation is in progress.
Displayed when AWB is completed error-free.
Displayed when AWB is completed error-free, and the colour temperature is
outside the display range (under ¢.¢K).
Displayed when AWB is completed error-free, and the colour temperature is
outside the display range (over ¢.¢K).
Displayed when AWB is completed with an error.
Displayed when AWB cannot be performed because AWB is set to PRE.
Displayed when ATW (full time auto white balance) is in progress.
Displayed while the ABB operation is in progress.
Displayed when ABB is completed error-free.
Displayed when ABB is completed with an error.
Warns that the colour temperature is too low during the AWB operation.
Warns that the colour temperature is too high during the AWB operation.
Warns that the brightness is too high during the AWB operation.
Warns that the brightness is too low during the AWB operation.
Warns that the screen is not stable during the AWB or ABB operation.
Warns that the AWB or ABB processing could not be completed within the
allotted time.
Displayed when the IRIS MODE switch is at the SPOT.L position.
Displayed when the IRIS MODE switch is at the BACK.L position.
Displayed when QUICK FOCUS is ON.
17 (E)
For further details, refer to