Menu Contents; Scene Menu (Main Menu) - Panasonic AG-DVC 200E Operating Instructions Manual

Menu contents

SCENE menu (main menu)

#N E X T ¢¢¢¢ SCENE ¢¢¢¢
S C E N E F I L E . .
I R I S G A M M A . .
C O L O U R / S K I N T O N E . .
P R O C E S S . .
A D D I T I O N A L P R O C E S S . .
SCENE FILE
Setting
Item
options
NAME EDIT USER For editing scene filenames.
F1 - F4 For further details, refer to "Editing scene
STD filenames" (page 23).
WRITE For writing a scene filename.
INIT For returning the scene filenames to their
factory settings.
IRIS/GAMMA
Setting
Item
options
A. IRIS LEVEL –10 For setting the AUTO IRIS target value.
: The brightness (IRIS) is controlled using
+00 this value.
: brighter the images shot.
+10
A. IRIS PEAK/AVE AVE For setting the ratio between the AUTO
10 IRIS peak value control and average value
: control.
01 control is exercised completely by the
average value; with a setting of 10 for
PEAK
PEAK, control is exercised completely by
00
the peak value.
:
10
A. IRIS SPEED –2 For setting the AUTO IRIS speed.
:
+0
:
+2
BLACK PRESS For selecting the low-brightness black rise.
STR/PRESS NORM PRESS: The black is compressed, and the
STR
NORM: Standard setting
STR:
MASTER GAMMA –17 For setting the master gamma.
:
+00
:
+03
WRITE For saving the data.
F 1 : F L U O .
Remarks
Remarks
The higher the setting, the
With a setting of 10 for AVE,
images appear tight.
The black is extended, and the
gradations in the dark areas are
expanded.
32 (E)
COLOUR/SKIN TONE
Setting
Item
options
PRE COLOUR –30 For finely adjusting the colour temperature
TEMP : from the white balance when the WHITE
+00 BAL switch is set to the PRE position.
: This does not function with the ATW mode.
+30
Ach –30 For finely adjusting the colour temperature
: from the white balance when the WHITE
+00 BAL switch is set to the A position.
: This does not function with the ATW mode.
+30
Bch –30 For finely adjusting the colour temperature
: from the white balance when the WHITE
+00 BAL switch is set to the B position.
: This does not function with the ATW mode.
+30
SKIN TONE DTL ON For setting the skin tone detail ON or OFF.
OFF When the skin tone detail is set to ON, the
detail in the skin tone areas is reduced,
diminishing the feeling of roughness in the
skin.
<Note>
When ON has been set for SKIN TONE
DTL and the SKIN TONE RANGE or SKIN
TONE CORING menu item is being set, the
SKIN TONE ZEBRA pattern will appear for
10 seconds.
SKIN TONE NORM For setting the skin tone detail range.
RANGE WIDE NORM:Normal range
WIDE: Wide range
WRITE For saving the data.
" " indicates the factory setting.
Remarks