6.8. PUNT ADJ
NOTE
•
Adjustment objective: After replacing the MAIN PCB and BARREL, you must decide the AF search range so that the
optimal focus can be identified by the body tube.
•
Necessary equipment: Infinity Callimator
<Adjustment method>
1) Save the adjustment file to the microSD card and install it on the camera.
2) Refer to the following adjustment environment specification to adjust the focus.
a) Used specification of Infinity Callimator
•
Set the illuminance specification of the Callimator to 6 LV.
•
Maintain distance of less than 1cm between the end of the camera
body tube to the lens surface of the Infinity Callimator.
•
The camera must be fixed while the adjustment is made.
Figure 6.7
Copyright© 1995-2011 SAMSUNG. All rights reserved.
Infinity Callimator
Camera
Tripod
6. Adjustment
6-9