2. Operation Instruction
2.1.2. Transferring files with Intelli-studio
NOTE
•
Intelli-studio will start automatically when you connect the camera to your computer with the USB cable.
•
The battery will charge while the camera is connected to a computer with the USB cable.
1) In Shooting or Playback mode, press [MENU].
2) Select Settings PC Software→ On.
3) Turn off the camera.
4) Connect the camera to your computer with the USB cable.
CAUTION
You must plug the end of the cable with the indicator light (▲) into your camera. If the cable is reversed, it may
damage your files. The manufacturer is not responsible for any loss of data.
5) Turn on the camera.
•
The computer recognizes the camera automatically and Intellistudio launches automatically.
NOTE
If you set the USB option to Select Mode, select Computer in the pop-up window.
6) Select a destination folder on your computer, and then select Yes.
•
New files stored on the camera will automatically transfer to the selected folder.
•
If your camera has no new files, the pop-up window for saving new files will not appear.
NOTE
For Windows Vista and Windows 7, select Run iStudio.exe from the Auto Play window to start Intelli-studio.
2-2
Copyright© 1995-2011 SAMSUNG. All rights reserved.