Adjustment; Basic Guide For Adjustment - Samsung PL120 Service Manual

6. Adjustment

6.1. Basic guide for adjustment

NOTE
• After you replace remove this word electronic parts, you must make changes for each adjustment item in the PL120.
• The following table shows the necessary adjustment item for replacing each part.
1) After replacing an electronic part, you must make adjustments for each item by referring to the following table.
Table 6.1
Adjustment
FIRMWARE UPGRADE
PUNT ADJ
BACKLASH
SHUTTER CLOSE TIME, IRIS ADJ,
CCD GAIN, LENS SHADING
FLASH ADJ
BATTERY LEVEL ADJ
BURNING TEST & CCD DEFECT
CELL
SERIAL NUMBER WRITING
2) Adjustment equipment
• AE TESTER: AE TESTER that enables LV 12
• Infinity Callimator for PUNT adjustment
• Gray chart (18%) for FLASH & AWB, DARK BOX
• POWER SUPPLY: 4.2V/2A
3) Adjustment program file
Save and use the program for each adjustment item on the microSD card to adjust each item.
The file name for each adjustment item is the same as "PL120_ADJ.TXT", "PL121_ADJ.TXT".
Copyright© 1995-2011 SAMSUNG. All rights reserved.
MAIN PCB POWER PCB
●
●
●
●
● ●
● ●
● ●
●
6. Adjustment
BARREL ASSY CCD ASSY
●
●
●
●
●
●
●
●
●
●
6-1