Transferring Files With Intelli-Studio - Samsung WB100 User Manual

Transferring files to your Windows computer

Transferring files with Intelli-studio

You can download Intelli-studio from the linked webpage and
install it on your computer. When you connect the camera to
a computer with Intelli-studio installed, the program will launch
automatically.
1
Rotate the mode dial to
2
Select Connectivity → PC Software → On.
3
Turn off the camera.
4
Connect the camera to your computer with the
USB cable.
You must plug the small end of the USB cable into your camera. If the
cable is reversed, it may damage your files. The manufacturer is not
responsible for any loss of data.
.
Playback/Editing
5
Turn on the camera.
• When the Intelli-studio installation pop-up appears on the
computer screen, follow the on-screen instructions to
complete the installation.
• Once the Intelli-studio is installed on your computer, the
computer recognizes the camera and launches the
Intelli-studio automatically.
6
Select a destination folder on your computer, and then
select Yes.
• New files stored on the camera will automatically transfer to
the selected folder.
• If your camera has no new files, the pop-up window for saving
new files will not appear.
For Windows Vista and Windows 7, select Run ilinker.exe from the Auto
Play window to start Intelli-studio. If Run ilinker.exe does not appear on
the computer, click → Computer → Intelli-studio, and then follow the
on-screen instructions to complete the Intelli-studio installation.
86