Storing And Calling Up Blood Pressure Readings - Panasonic EW3153 Instructions Manual

Storing and Calling up Blood Pressure Readings
Up to 90 readings each can be stored in the memory for two people.
Storing blood pressure readings
• All data is retained even when the batteries go flat or are changed.
• When measurements are taken and no date has been set, the date and
time will be displayed as "
(After approx.
2 seconds.)
(After approx.
2 seconds.)
(After approx.
2 seconds.)
1. After measurement has been completed, the
mark will be lit up.
Press the user selection button on the wireless
display to select the desired user.
To select User
To select User
2. Press the Memory/Recall button.
3. Memory storage is completed.
• A total for
in memory. Readings over the memory capacity
will be recorded over the oldest measurement in
memory.
• Readings cannot be saved when a measurement
has been unsuccessful (display of the error mark
for blood pressure readings). Readings can
be saved, however, when the mark is displayed
for the pulse rate.
• The memory number, measurement date, and
time are alternately displayed in approximately
 seconds.
" on the wireless display.
... To Step .
... Press the user selection button.
and of 90 readings can be stored
4
English