Panasonic EW3153 Instructions Manual page 35

Symptom
Pressure cuff comes off.
Indications on the
wireless display do not
change during operation.
No display appears even
when the On/Off and
Start button is pressed.
The mark
flashes when readings
are being taken.
The mark flashes
when readings are being
taken.
The mark flashes
even though I did not
move my arm or body.
Varying sounds and
pressurization speeds
occur during inflation of
the cuff.
The wireless display is
lost.
Instrument is broken.
If the unit still appears to provide unusual or erroneous readings,
consult your physician. If the unit does not appear to be functioning
properly, contact Panasonic at 1-800-338-0552.
Possible cause
• Press the ring portion on the outside of the
pressure cuff into the main unit.
(See page 3.)
• The wireless display is improperly
positioned.
• Your hand or another object is in front of the
wireless display. (See page 18.)
• Batteries are installed with the polarities
wrong. (See pages 11–13.)
• Batteries are exhausted.
(See pages 11–13.)
• There was a significant fluctuation in pulse
when readings were being taken.
(See page 1.)
• Your arm or body moved.
(See page 0.)
• In some cases this will be displayed when
you have tensed the muscles in your hand.
Relax the muscles in your hand and take
the reading again.
(See pages 15–17, 0.)
• Changes in operating sounds and
pressurization speeds are normal and occur
due to the fact that measurements are
being made as the cuff is being inflated.
Take it to the store where it was purchased
for testing and repairs.
34
English