Storing and Calling up Blood Pressure Readings
Calling up readings from memory
Readings can be recalled after being saved without having to switch the
unit on.
(After approx.
2 seconds.)
(After approx.
2 seconds.)
(After approx.
2 seconds.)
5
English
1. Press the user selection button on the wireless
display to select the desired user.
To select User
To select User
2. Press the Memory/Recall button.
•
The average readings of all recorded
measurements are displayed.
•
When readings from 90 measurements have been
saved the average of the readings from all
90 measurements will be displayed. (If there is
only 1 measurement recorded, mark
be displayed.)
•
The mark
•
Blood pressure indicator
approximately 6 seconds.
3. Press the Memory/Recall button to display
readings starting with from the most recent
measurement.
•
Each time the Memory/Recall button is pressed
readings are displayed in order of the most recent
measurement.
•
The memory number, measurement date, and
time are alternately displayed in approximately
seconds.
4. Press the Adjust button "2" on the wireless
display to switch off the unit.
•
If you forget to switch off the unit it will do so
automatically after approx. 30 seconds.
... To Step .
... Press the user selection button.
will be displayed.
will be lit up for
(continued)
will not