Sage BPR700 Instruction Book page 4

• As the colours of the wire
may not correspond with the
coloured markings which
identify the terminals in
your plug, please refer to
the following:
−The Blue wire must be
connected to the terminal
which is marked 'N'.
−The Brown wire must
be connected to the
terminal which is marked
with the letter 'L'.
−The Green & Yellow wire must
be connected to the terminal
which is marked with the
letter E or the earth symbol .
• Please note that if a 13 amp
plug is used, a 13 amp fuse
should be used.
• Remove and safely discard
any packaging material and
promotional labels before use.
• To eliminate a choking hazard
for young children, remove and
safely discard the protective
cover fitted to the power plug
of this appliance.
• Always ensure the appliance
is properly assembled before
use. Follow the instructions
provided in this book.
4
• Always insert the connector
end of the power cord into
the appliance inlet before
inserting power plug into the
power outlet and switching on
appliance. Ensure the appliance
inlet is completely dry before
inserting the connector end of
the power cord.
• Take care to avoid spillage on
the connector.
• Do not touch hot surfaces.
Appliance surfaces are hot
during and after operation.
To prevent burns or personal
injury, always use protective
hot pads or insulated oven
mitts, or use handles or knobs
where available.
• Do not place the appliance near
the edge of a bench or table
during operation. Ensure that
the surface is dry, level, clean
and free of any liquid and other
substances.
• Always operate the appliance
on a stable and heat resistant
surface. Do not use on a cloth-
covered surface, and position
the appliance at a minimum
distance of 20cm away from
walls, curtains, cloths and other
heat sensitive materials.