Sirius Satellite Radio SIRIUS STILETTO 2 Installation & User Manual page 32

to locate an FM channel that is not broadcasting in your area. If you use an FM channel
that is being used by a local broadcaster, it will interfere with the performance of your
SIRIUS radio. Once you have located an FM channel that is not broadcasting in your
area, save it as a preset on your vehicle radio. This will become your SIRIUS preset.
2. Power the Stiletto 2
the left side of the vehicle dock or press the
3. Use the Media Dial
channel. (Figure 18)
you want to store the selected FM channel as a preset. (Figure 19)
button to exit and transmit on the selected FM channel. The Stiletto 2 will transmit on the
selected FM channel.
note: The FM transmitter in your SIRIUS radio is automatically set to FM channel 88.1. note: The FM transmitter in your SIRIUS radio is automatically set to FM channel 88.1.
This may not be the best channel in your area. This may not be the best channel in your area.
Tip: If you regularly travel between cities with different active FM channels, you may Tip: If you regularly travel between cities with different active FM channels, you may
need to find channels that are not broadcasting in each city. The Stiletto 2 can store need to find channels that are not broadcasting in each city. The Stiletto 2 can store
multiple FM transmit channels as presets, so you can easily switch to the best FM multiple FM transmit channels as presets, so you can easily switch to the best FM
channel for each city. You will also want to set the FM channels that are not broadcast- channel for each city. You will also want to set the FM channels that are not broadcast-
ing in each city as presets on your vehicle radio. ing in each city as presets on your vehicle radio.
You should now hear the audio from your SIRIUS radio over your vehicle's FM radio. If the
audio quality is not satisfactory, you should install the FM Extender Cable as described in the
following section (or use a direct connection as described on page 48).
on. When it is completely powered up, press the
or the buttons on the remote control
Press and hold a preset number (0—9) on the vehicle dock in which
FM Transmit
Turn the Media Dial to
change the frequency.
Use the number keys to
recall or assign FM
presets.
90.1
figure 18 figure 18
FM button on the remote control.
to select the same FM
FM Transmit
Turn the Media Dial to
change the frequency.
Use the number keys to
recall or assign FM
presets.
90.1 FM1
figure 19 figure 19
FM button on
fm
Press the Select
[ ]

Installation