Sirius Satellite Radio SIRIUS STILETTO 2 Installation & User Manual page 25

Pickup Truck antenna Cable Routing Procedure
Figure 12 shows how the antenna cable should be routed from the antenna to your SIRIUS
radio in a pickup truck.
Follow these detailed cable installation instructions:
1. Use a plastic putty knife or similar tool to lift the rubber molding around the windshield
and tuck the antenna cable underneath it.
2. Continue tucking the cable underneath the windshield molding around the windshield to
the lowest corner.
3. At the lowest corner of the windshield, route the cable out of the windshield molding and
into the rubber weather stripping around the door opening. Lift the weather stripping
from the opening and tuck the cable inside it, then replace the weather stripping. Run
the cable inside of the weather stripping to the bottom of the door opening.
4. Pull the cable out of the weather stripping at the bottom of the door opening and route it
under the carpet toward the dashboard. Coil any excess cable in a hidden location, such
[ ]
2
Installation
2. Continue Tucking Cable
Under Molding To
Bottom of Windshield
3. Route Cable Out of Molding
and Into Weatherstripping
Around Door Opening.
Continue to Bottom of
Door Opening.
4. Bring Cable out from
Weatherstripping and
Route Under Carpet.
figure 12 figure 12
1. Route Cable
Under Rubber
Molding Around
Windshield
5. Bring Cable Out to
SIRIUS Radio
Location