Programming- Operator Access Programming - Fetco CBS-2151XTS User Manual

-The FETCO CBS-2150XTS brewers have four brew batch menus per side.
Menus are preprogrammed by the factory with basic settings that will operate the equipment as purchased.
There are two batches each marked "Regular" and two marked "Decaf"
-Most operators prefer a full batch and half batch setting for regular and decaf or specialty coffees.
The half batch setting will need to be programmed by the operator to match the dispenser.
Settings are adjustable and the name of the menu can be changed. -Batch 1 & 4 cannot be disabled.
-
Menu screen displayed
XTS
™
CBS_2132 3L
EXTRACTOR
TOUCHSCREEN
Ready Touch
Heating screen
Filling to unlock
(Brewer "HOME" screen)
To enter:
Immediately place finger on screen and "HOLD"—"PROGRAM" Screen
Use right/left and down arrows to travel through programming. "EXIT" saves settings
PROGRAM
Batch 1 Left
EXIT
Programming Category
PROGRAM
Items for Programming
Batch 1 Left*
Batch 2 Left**
Batch 3 Left **
Batch 4 Left **
Batch 1 RIGHT*
Batch 2 Right **
Batch 3 Right **
Batch 4 Right **
Batch Copy

Programming- operator access programming

Accessing
Programming
Turn unit "OFF"
After 10 second delay:
Turn unit "ON"
"HOME" Screen on left will
appear
Immediately place finger on
screen and "HOLD"
Screen on right will appear
Programming-category screens: Menu Tree
Programming category screens
Turn unit "OFF", After 10 second delay, turn unit "ON", (Home Screen will appear),
GENERAL
Tank Temp
EXIT
Programming Category
GENERAL
Items for Programming
Tank Temp
Brew At Temp
Units of Meas.
ECO Mode
Logo Timeout
Brew B.Sensor
Use Flojet
LLC Sensitivity
Menu screen displayed
PROGRAM
Batch 1 Left
EXIT
(Programming menu screen)
INPUTS
Display Inputs
EXIT
Programming Category Programming Category
INPUTS
Items for Programming
Display Inputs Show Summary
Calib Touch Scr Left Valve
L. Bypass Valve
Right Valve
R. Bypass Valve
Fill Valve
Left Basket Lk
Right Basket Lk
Heater
Screen
6
Accessing
Programming menu screens
Top line is programming category
Second line displays items for
programming
Right and left hand arrows will scroll
to the screens that display
"Program, General, Inputs,
Outputs and Other"
The down arrow enters the
individual programming items
shown below
(first below) will appear.
OUTPUTS
Show Summary
EXIT
Programming Category
OUTPUTS
Items for Programming Items for Programming
Error Codes
Copy Program
Upload Logo
Res to Factory
Counters
Firmware
DEMO Mode
OTHER
Error Codes
EXIT
OTHER