Hdd Installation; Front Panel - 8 Level DVR-AHD-041-1 Installation And Operation Manual

3. HDD Installation

•
Remove 4 cover screws and detach the DVR cover plate. Slightly bend the cover
sides outwards to help.
•
Put the HDD in the bottom of the HDD bracket housing horizontally and push it into the
motherboard SATA interface.
•
Overturn the DVR bottom up and lock the HDD with screws.
•
Install the cover back on and lock with 4 screws.
Caution: This DVR series does not support the HDD hot swap, please connect the HDD
before you turn on the DVR. During long distance transportation please detach the HDD
to avoid damaging it.

4. Front Panel

4.1 Power button
•
When logged in, pressing Power button activates the Power Options Menu.
•
If the Power button is pressed and held during power on procedure, Software Update
Menu will pop up.
4.2 LED indicators
•
Power Led – green light when the power is on
•
Alarm Led – flashes when alarm is on
•
Rec Led – flashes when record is on