Table of Contents
Advertisement
12.2 Schedule Record
Follow below steps to enter Schedule Record interface:
1. Select the corresponding channel No..
2. Deployment time: choose the record date for setting, can be everyday or a certain day (multiple
choices). Time range setting: choose the time range of record, can be set multiple range in one
day, the setting of time according to the time order.
3. Click "Save" to activate the settings, you can also duplicate the settings to other channels.
13. Alarm Setup
"Alarm Setup" interface is as below:
13.1 Motion
Enter "Motion detection" interface by "Main Menu" -> "Alarm Setup" -> "Motion"
Motion detection operation steps:
Step1: Enter "Main Menu" -> "Record Setup" -> "Record para." interface to set corresponding
channel pre-record time and delay-record time.
Step2: Select the channel number which you want to motion record.
Step3: Continuous alarm: after enable, motion alarm will continuous alarm when there has
something moved in the video image.
Step4: Define the motion detection sensitivity level: There have 5 levels: 1(lowest level
)~5(Highest level
Step5: Detection area setting: Yellow color will detect motion. Grey color will not detect.
System default the whole area will detect.
Step6: Set the deployment time (the specific setting please refer to schedule record).
Step7: Linkage setting: Set Trigger Record, Screenshot linkage, Alarm output, Email linkage,
PTZ preset point.
Advertisement
Table of Contents
