Table of Contents
Advertisement
•
Trigger Record: Select the channel number which you want to set linkage.
•
Alarm output: If alarm output setting is blue color means it will alarm when have alarm
events. If is grey color mean will not alarm output.
•
Email linkage: Select "Email linkage" means DVR system can send the alarm information to
your email box which have set when motion alarm happens.
•
PTZ preset point: System support the function of dome will turn to preset point when motion
happens.
13.2 Sensor
Sensor alarm recording setting steps:
Step1: Enter "Main Menu" -> "Record Setup" -> "Record Para." interface to set the channel pre-
record time and delay-record time.
Step2: Enter "Main Menu" -> "Alarm Setup" -> "Sensor" , then the interface is the right figure
above: Step3: Select Sensor type: Normal on or Normal off.
Step4: Select sensor number.
Step5: Set sensor deploying time (the specific setting please refer to schedule record).
Advertisement
Table of Contents
