TANACOM BULL 750 Operating Manual page 28

Functional setting operation
Jigging master
You can choose the jigging pattern, range, waiting time and length you require.
- Pressing the JIG/PICKUP
button once more cease jigging.) The power lever controls jigging speed.
- Shifting of jigging speed is done easily with the lever control.
- When a fish strikes during jigging, it turns off providing the power lever is turned to the OFF position. After that,
normal winding is done with the power lever.
- To show the jigging display, refer to page 18.
1. Jigging pattern
You can choose the number of steps you wish for your jigging
pattern.
One-step jigging
A
Master jigging (123) is the method in which the number of jigging
steps is selected automatically by the computer.
2. Jigging length
You can choose the length of the line wound up in one jig action.
(Depending upon the sinker, speed of winding, the jigging
length may overrun its setting slightly.)
The length can be set in increments of 50 cm between 0.5 and
10 m.
(7. Jigging)
BUTTON, starts jigging, with the display showing the
Two-step jigging
A
B
Three-step jigging
A
B
B
A : 4 seconds stop
B : 0.4 seconds stop
26
indicator. (Pressing the
(Preference setting)
Master jigging
(Preference setting)