Table of Contents
Advertisement
Line data input
This procedure is to enter the line length after it has been wound onto the reel. It is necessary that
you know the line length and that it is greater than 100m.
1.
Turn the power on while the main line is wound up.
2.
Press the
MODE BUTTON
indicating 0.0.
It turns to P1 mode and
P1
3.
Press the
MODE BUTTON
of P3 Backing line 2.
It turns to P3 mode and
P3
part of the counter.
4.
Paying attention to the lineʼs color coding, pull 50m of line off of
the spool.
(The number of the counter above increases.)
5.
Pull out 50 m of line and then press the
more than 2 seconds.
This will show the digits
for more than 5 seconds while it is
blinks.
2 more times to display the display
blinks, with a display of
RESET BUTTON
100
in the lower area of the counter.
(Backing line 2---P3)
2
3
50
in the lower
5
for
16
Hide quick links:
Advertisement
Table of Contents
