TANACOM BULL 750 Operating Manual page 20

Functional setting operation
How to set the many functions available
1.There are many useful functions in the mode
2.While the mode setting display is on, operate the power lever to change it to a desired value, and
then press the MODE BUTTON
1.
Press the MODE BUTTON
Each press of the MODE BUTTON
next function.
Holding the MODE BUTTON
displays, quickly getting you back to the depth display.
At each mode setting display, the default setting can be
retained by pressing the
While letting out or winding line, the
used to change settings.
Jig/pickup pattern
MODE
BUTTON
Pickup speed
(1. Mode setting display)
to complete the procedure.
to choose a display.
changes the display to the
down, rapidly scrolls through the
RESET BUTTON.
MODE BUTTON
Power lever
Jigging pattern
This is displayed when the
When it is set to jig, it displays the jigging pattern (2).
(It depends on the setting.)
MODE
BUTTON
Jig waiting time
(Each display example is the default setting)
3
cannot be
MODE
BUTTON
Jigging length
MODE BUTTON (1) is set to pickup.
Jigging range
MODE
BUTTON
18
Winding speed display
MODE
(Select the indicator
BUTTON
of either the measured
winding speed or the
inverse counter.)