Table of Contents
Advertisement
TG5871AL.book Page 54 Friday, June 17, 2005 7:01 PM
Programmable Settings
Display setting L
(Colour display models
only)
Important:
L Only the KX-TGA582AL supports these
features.
Wallpaper
You can select the "wallpaper" pattern
shown on the display in standby mode.
There are 3 preset patterns.
You can also download your original
pictures from a PC. Refer to the help
section of the GIGARANGE USB Utility
software for details. If you have not
installed the GIGARANGE USB Utility
software, refer to the included "Installation
Guide for GIGARANGE USB Utility" for
details.
1
Press {MENU} (centre of joystick).
2
Scroll to L, then press {SELECT}.
3
Scroll to "Wallpaper", then press
{SELECT}.
4
Scroll to "Set picture", then press
{SELECT}.
L To turn the wallpaper feature off,
select "Turn off". The display
colour will change to the colour you
selected for colour (see "Handset
display colour" on page 55).
5
To select a preset pattern, scroll to
"Fixed data", then press {SELECT}.
OR
To select your original picture, scroll to
"User data", then press {SELECT}.
6
Push the joystick up or down repeatedly
to select the desired pattern.
L To view the picture name, press
{LIST}. To return to the picture, press
{VIEW}.
54
7
Press {SAVE}, then press {OFF}.
Note:
L The preset patterns "Wallpaper1" and
"Wallpaper2" in this product are used
with permission of © 2005 Digital
Archive Japan, Inc.
L The preset pattern "Wallpaper3" in this
product is used with permission of
© 2005 MIXA Co., Ltd.
L If you have missed calls or new
messages, the selected wallpaper
pattern will not be displayed while the
handset is off the base unit or charger.
The display will indicate that you have
missed calls or new messages instead.
Erasing a picture from the "User data"
1
Press {MENU} (centre of joystick).
2
Scroll to L, then press {SELECT}.
3
Scroll to "Wallpaper", then press
{SELECT}.
4
Scroll to "Set picture", then press
{SELECT}.
5
Scroll to "User data", then press
{SELECT}.
6
Push the joystick up or down repeatedly
to select the desired picture.
7
Press {CLEAR}.
L To cancel erasing, press {NO}.
8
Press {YES}.
L To erase another picture, repeat from
step 6.
9
Press {OFF}.
Note:
L If the erased picture was selected for the
wallpaper, "Wallpaper1" (default) will
be used instead of that picture.
Advertisement
Table of Contents
