Setup Wizard - Mac - D-Link DNR-312L User Manual

Section 2 - Installation
The following instructions show you how to set up the NVR using your Mac
computer.
Step 1
After you have inserted the CD into your computer, go to the CD drive
directory, and double-click the Mac Utility folder to enter.
Double-click the DNR-312L Setup Wizard file to start the Setup Wizard,
which will guide you through the installation process from connecting your
hardware to configuring your NVR.
Note:
You can also visit www.dlink.com/support to download the software for your
product.
Step 2
Simply click Start to go through the Setup Wizard, which will guide
you through the installation process from connecting your hardware to
configuring your NVR.
Note: The computer used to access the NVR must be on the same subnet as the NVR. If your network is using a DHCP server, the NVR
will automatically be in the same subnet.
D-Link DNR-312L User Manual

Setup Wizard - Mac

18