Camera Search - D-Link DNR-312L User Manual

Network video recorder with hdmi

Hide thumbs Also See for DNR-312L:

Table of Contents

Section 4 - Configuration

The Camera Search function lets you automatically add cameras to the NVR.

You can then view camera information and preview the camera's feed. To

add cameras follow the steps below.

Step 1: Click Search to search for network cameras. The system will list

all the available cameras at this moment. Click the + icon to add a

camera to your camera list. If the cameras are already added, it will

be marked in red.

Step 2: After clicking the icon, the camera setting page will pop up. Click on

the camera that you want to add.

Step 3: Enter the camera name, user name, and password of the camera.

Notes:

• Some cameras will limit the login authority to the administrator only.

• To add cameras without the UPnP function, please go to the camera Setup

menu and enter the IP address manually.

• You may not be able to see all the cameras on your first search. It may take a

moment for the devices to respond to the UPnP request. Please click Search

again if the cameras are not immediately displayed.

Step 4: Click Add to add the selected camera.

Step 5: After clicking Add, the updated information will be displayed in the

camera list. Repeat steps 2 through 5 to add other cameras to your

list.

D-Link DNR-312L User Manual

Camera Search

Table of Contents