Parking Mode - HP f555g User Manual

3. The detections of FCMD may be inaccurate when used in rain, at night or in environments of
insufficient lighting. Drivers are advised to exercise discretion based on actual road conditions.
4. The product will recalibrate 30 seconds later after the initial alert if the FCMD function has been
activated. If the vehicle remains in a stationary mode and the product detects image changes in
the front lens, the product will once again trigger the voice and screen message alerts.
5. Feature is only applicable under the following resolutions: 1080P/60fps, 1080P/30fps.

3.1.12 Parking Mode

To monitor the vehicle when it is parked, you can activate Motion
Detection or Vibration Detection.
1. If recording is in progress, press the
2. Press the
3. Press the
button.
4. Press the
Detection, and then press the
5. Press the
Item
Vibration
Detection
Motion
Detection
button to enter the OSD menu.
/ button, select Parking Mode, and then press the
/ button, select Vibration Detection or Motion
button to exit the menu.
If disconnected from power when the camcorder
is powered on, the system alert message "Wait
for 60 seconds to enter Vibration Detection or
press
means the system will enter Vibration Detection
automatically in 60 seconds; when the camcorder
detects any external vibration
vehicle after three minutes when all passengers
have alighted, Video Record will be 90 seconds
and the recording will be protected. If press
within 60 seconds, the camcorder will be powered
off instead of entering Vibration Detection mode.
If disconnected from power when the camcorder
is powered on, the system alert message "Wait
for 10 seconds to enter Motion Detection, or
press
system will be displayed on the screen. This
button to stop recording.
button.
Description
to cancel and power off." This
to power off." This means the
applied to the
25