Fcmd (Front Car Move Detection) - HP f555g User Manual

3.1.11 FCMD (Front Car Move Detection)

Once your car's location is determined by GPS and the FCMD function is
enabled, this product starts to detect the motion of cars in front of you
after your car remains motionless for 20 seconds. It produces voice and
screen message alerts when the movement of the car in front of you
changes its images in the camera.
1. If recording is in progress, press the
button to stop recording.
2. Press the
menu.
3. Press the
and then press the
4. Press the
press the
5. Press the
6. After enabling FCMD, the screen will display align icon
please adjust the camcorder so that the horizontal line and the eye
level are overlapped and the slash lines are centered in the driving
lane. Make sure that align icon will not be obscured (e.g. hood)
during installation, it may cause misjudgment if the endpoint is
obscured.
Note:
1. Once your car at waiting zone, it produces voice and screen message alerts when the movement of
the motorcycles in front of you changes its images in the camera, and it will alert again in 30
seconds.
2. FCMD is only applicable when satellite positioning is in ready state. Make sure satellite positioning
of your camcorder is ready if you want to activate this function. Satellite positioning function is
dependent on the model purchased.
24
button to enter the OSD
/ button, select FCMD,
button.
/ button, select On, and
button.
button to exit the menu.
Eye Level
,
Vanishing Point
Horizon