Lan Features - Panasonic KX-MB3010 Operating Instructions Manual

9. Programmable Features

9.7 LAN features

Feature/Code
LAN setting with a DHCP
server
{#}{5}{0}{0}
Setting the IP address for the
LAN connection
{#}{5}{0}{1}
Setting the Subnet mask for
the LAN connection
{#}{5}{0}{2}
Setting the default gateway
for the LAN connection
{#}{5}{0}{3}
Setting the primary DNS
server for the LAN
connection
{#}{5}{0}{4}
Setting the secondary DNS
server for the LAN
connection
{#}{5}{0}{5}
Setting the machine name
{#}{5}{0}{7}
Displaying the MAC address
of the unit
{#}{5}{0}{8}
68
Selection
{0} "DISABLED": Deactivates this feature.
{1} "ENABLED" (default): The following will be allocated automatically using a
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{1} i {Set}
2. Enter the IP address of the unit on the LAN using the dial keypad. i {Set}
i {Menu}
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{2} i {Set}
2. Enter the subnet mask of the network on the LAN using the dial keypad. i
{Set} i {Menu}
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{3} i {Set}
2. Enter the default gateway of the network on the LAN using the dial keypad.
i {Set} i {Menu}
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{4} i {Set}
2. Enter the primary DNS server of the network on the LAN using the dial
keypad. i {Set} i {Menu}
This feature is available when feature #500 is deactivated.
1. {Menu} i {#}{5}{0}{5} i {Set}
2. Enter the secondary DNS server of the network on the LAN using the dial
keypad. i {Set} i {Menu}
1. {Menu} i {#}{5}{0}{7} i {Set}
2. Enter the name of the unit to recognize on the LAN, up to 15 characters,
using the English alphabet and numbers (see page 72 for character entry).
L The following symbols can also be entered.
! @ # $ % ^ & ' ) ( . - _ { }
3. {Set} i {Menu}
Note:
L In order to recognize the unit on the LAN, the default name of the unit is
assigned automatically. If you change the name, assign a unique name to
avoid overlapping.
1. {Menu} i {#}{5}{0}{8} i {Set}
2. The MAC address of the unit will be displayed. i {Menu}