Fax Features (Kx-Mb3020 Only) - Panasonic KX-MB3010 Operating Instructions Manual

9.3 Fax features (KX-MB3020 only)

Feature/Code
Erasing all items stored for
the one-touch dial and
navigator directory
{#}{2}{8}{9}
Printing a confirmation report
{#}{4}{0}{1}
Setting the journal report to
print automatically
{#}{4}{0}{2}
Sending documents
overseas
{#}{4}{1}{1}
Selection
{0} "NO" (default)
{1} "YES"
L Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
To erase all items:
1. {Menu} i {#}{2}{8}{9}
2. Press {1} to select "YES". i {Set}
3. Press {1} to select "YES". i {Set} i {Menu}
{0} "OFF": Confirmation reports will not be printed.
{1} "ON": A confirmation report will be printed after every fax transmission.
{2} "ERROR" (default): A confirmation report will be printed only when fax
transmission fails.
{0} "OFF": The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.
{1} "ON" (default): The unit will print a journal report automatically after every
30 new fax transmissions and receptions (page 41).
If you cannot send a fax overseas even if the number is correct and the line is
connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
{0} "OFF": Deactivates this feature.
{1} "NEXT FAX": This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
{2} "ERROR" (default): When the previous fax transmission fails and you wish to
re-send the document.
Note:
L This feature is not available for broadcast transmission.
L Calling charges may be higher than usual.
9. Programmable Features
59