Flash Photography - Canon 600EXII-RT Instruction Manual

a: Fully Automatic Wireless Flash Photography
Advanced Shooting with Fully Automatic Wireless Flash
Since the following functions set on the master unit will be set
automatically to the slave units with this wireless system, you do not
need to operate the slave unit(s). For this reason, you can perform
wireless flash photography in the same way as normal flash
photography.
• Flash exposure compensation
( /p.28)
f
( /p.29)
• FEB
g
(p.30)
• FE lock
You can also directly operate the slave unit to separately set flash exposure
compensation and flash coverage on each slave unit.
Master Units
You can designate two or more master units. By preparing multiple
cameras with master units attached, you can change cameras while
keeping the same lighting (slave units) during wireless flash
photography.
Note that when using two or more master units, the color of the <D>
lamp will change depending on the order in which the master setting
was performed. The first master (main master) is green, and the second
and subsequent masters (sub-masters) are orange.
If the <D> lamp is red, the connection has not been established. After
checking the transmission channel and wireless radio ID, turn each
master unit off and on again.
During radio transmission wireless shooting, limit the total number of
masters and slaves up to 16 units.
You can take pictures even when the master flash is set as a sub-master.
72
• High-speed sync
( /p.31)
c
• Manual flash
• Stroboscopic flash
(p.40, 77)
(p.42)