Q: Multiple Flash Photography With Manual Flash Output - Canon Macro Twin Light MT-26EX-RT Instruction Manual

q: Multiple Flash Photography with
Manual Flash Output
This section describes wireless multiple flash shooting using manual
flash. You can shoot with flash output set within a range of 1/1 full
output to 1/128 power in 1/3-step increments for each firing group. Set
all the parameters on the master unit.
Turn <9> to select the firing method from the options below. You
can perform wireless multiple flash shooting with slave A, B, and C
added.
• All slave units have the same flash output: <j>
• Set flash output for slave units A and B: <9>
• Set flash output for slave units A, B, and C: <8>
76
Set the flash mode to <q>.
1
Press the <E> button.
Turn <9>, select <R>, then
press <8>.
Set the firing group.
2
Press the <,> button.
Select a firing group.
3
When <9> or <8> is
selected in step 2, press function
button 3 <F> or <8>, turn
<9>, then select the group for the
flash output setting.