Q: Wireless Multiple-Flash Photography With Manual Output - Canon 600EXII-RT Instruction Manual

q: Wireless Multiple-Flash Photography with Manual Output

This section describes wireless (multiple-flash) shooting using manual
flash. You can shoot with a different flash output setting for each slave
unit (firing group).
Set the flash mode to <q>.
1
Press the <E> button on the
master unit.
Turn <9> to select <R>, then
press <8>.
The slave unit is set automatically to
<q> during shooting, controlled by
the master unit.
Set the firing group of the slave
2
units.
Operate and set the slave units one by
one.
Set to the group to be fired in step 3.
Press function button 4 to display
<M>.
Press function button 3 <F>,
then select <f>, <g>, or
<h>.
Set firing group control.
3
Press function button 4 on the master
unit to display <M>.
Press function button 2 <T> to
set the group to be fired.
Each time you press the button, the
setting switches in the following
sequence: <t> 9 <f>
<g> 9 <f> <g>
<h>.
77