Help Function; Adjusting Volume; Initial Programming - Panasonic KX-FLB811 Operating Instructions Manual

Help Button

2.4 Help function

The unit contains helpful information which can
be printed for quick reference.
– "BASIC SETTINGS":
How to set the date, time, your logo and fax
number and note for the quick setup (feature
#100 on page 59).
– "FEATURE LIST":
How to program the features.
– "DIRECTORY":
How to store names and numbers in the
directory and how to dial them.
– "FAX SND/RCV":
Help with problems sending/receiving faxes.
– "COPIER":
How to use the copier function.
– "Q and A":
Frequently asked questions and answers.
– "ERRORS":
Explanation of error messages shown on the
display.
– "REPORTS":
List of available reports.
– "CALLER ID":
How to use the Caller ID features.
{HELP}
1
Press {HELP}.
2
Press {<} or {>} repeatedly to display the
desired item.
3
Press {SET}.
L The selected item will be printed.
Volume
For assistance, please visit http://www.panasonic.com/consumersupport
{SET} {<}{>}

2.5 Adjusting volume

Before adjusting volume, set the operation mode
to the fax mode (page 28) or the copy mode
(page 44).
Ringer volume
While the unit is idle, press {V} or {^}.
L If any documents are in the document
entrance, you cannot adjust the volume.
Confirm that there are no documents in the
entrance.
To turn the ringer OFF
1. Press {V} repeatedly to display "RINGER
OFF= OK?".
2. Press {SET}.
L When a call is received, the unit will not
ring and will display "INCOMING CALL".
L To turn the ringer back ON, press {^}.
Ringer pattern
L You can select one of three ringer patterns
(feature #161 on page 59).
Monitor volume
While using the monitor, press {V} or {^}.

Initial Programming

2. Preparation
{SET} {V}{^}
23